AiM RPM Bridge - Manual (Page 10)

RPM Bridge
User manual
Release 1.03
www.aim-sportline.com 9
4
Chapter 5 – Configuring RPM Bridge
To configure RPM Bridge:
• run
Race Studio 2 software,
• go through these steps: press “AIM System Manager” >> ”SMC Bridge” >> “Go
to”;
• press “New” to create a new configuration;
• “New configuration” panel, shown here below, appears.
• select
RPM Bridge in the drop down menu, fill in the panel and press OK.
The system comes back to “System manager” window. Enable “System Configuration” layer.