AIM Sports Fiber Optic Tri-Illuminated Scopes User Manual

Page 16

Figure 1

Figure 2

ADJUSTING WINDAGE AND ELEVATION

ADJUSTING ELEVATION

1. Unscrew the cap located on top of the elevation adjustment dial. (Fig 1)
2. Turn the dial counter clockwise (noted on the dial as up with an arrow
pointing to the left) in order to raise the elevation/point of impact. (Fig 2)
3. Turn the dial clockwise to the right to lower the elevation.
4. Replace the cap to protect the dials from being moved out of alignment.

To illuminate the reticle:

1. Grasp the illumination dial located on left side of scope, when scope is
pointing down range.

2. Turn the dial clockwise from the OFF position to the first number
indicated on the dial.

3. View the target through the scope to determine if the reticle is bright
enough to stand out clearly against the target.

To preserve the life of the battery, always remember to turn the illumination
dial to the OFF position when the scope is not in use. For prolonged
storage, remove the battery.

If the reticle fails to illuminate or appears dim even on the highest
illumination setting, it is necessary to change the battery.

WARNING: Always check to ensure that the firearm is unloaded before
changing the battery in the scope.