AIM Sports Fiber Optic Tri-Illuminated Scopes User Manual
Page 12
9
22
Figure 1: Move the QRM lever arm into the open position.
Figure 2: Remove base mount nut and loosen screw.
Do NOT remove screw.
SEALS
AIM scopes are sealed from within by several methods, including O-rings.
All seals are permanent and require no maintenance.
SCOPE EXTERIOR
AIM scopes are made of rugged 6061-T6 aircraft aluminum alloy. No
maintenance of any kind is required; simply wipe off any dirt or fingerprints
that accumulate with a clean, dry cloth.
POWER SELECTOR RING
(ON VARIABLE POWER SCOPE)
No Lubrication is ever required on the power selector ring. DO NOT
LOOSEN OR REMOVE THE HEX-HEAD SCREW IN THE POWER
SELECTOR RING.
ADJUSTABLE OBJECTIVE/SIDE PARALLAX DIAL
No lubrication is required.