Industrial pcs mcr5000 – ADS-TEC MCR5000 User Manual

Page 14

Text mode
Original mode

Industrial PCs MCR5000

REPARATION FOR FIXING

Warning:
The MCR 5000 device is designated for installation with a TFT or plasma display. Before

the MCR 5000 can be fixed to the display, the respective brackets or retainers for

protecting the MCR 5000 from falling must be in place. The fall protection measures must

correspond to the "BGV C1" regulations.

Respective retainers must be installed above the MCR 5000 device. As soon as the
retainers have been installed, the device should be secured with these brackets or

retainers (as it can be seen in the figure, for example).