ACU-RITE CSS I/O Users Manual - Manual (Page 3)

CSS I/O 1
I General Information ..... 4
Connecting the CSS I/O to X101 (turning) ..... 4
I - 1 Execution of Switching Functions ..... 5
Switching inputs ..... 5
Switching outputs ..... 5
I - 2 Spindle Speed Control (RPM) ..... 8
Milling Systems ..... 8
Display ..... 8
Mill Spindle Installation setup ..... 9
Voltage Offset / RPM Source ..... 10
Voltage / RPM Setup ..... 11
Operation / Job Execution ..... 12
Mill Spindle Feature Run ..... 13
Mill Spindle Program Run ..... 13
I - 3 Controlling the Constant Surface Speed (CSS) ..... 14
Configuration of CSS ..... 15
CSS operating mode ..... 16
Activating the DAC output ..... 17
Connecting the CSS I/O to the inverter of the lathe ..... 18
I - 4 Diagnostics ..... 19
General Information ..... 19
Switching I/O functions ..... 19
CSS, and Mill Spindle ..... 20