I - 2 spindle speed control (rpm), Milling systems, Display – ACU-RITE CSS I/O Users Manual User Manual
Page 10
8
I Operating Instructions
I - 2 Spindle Speed Contr
o
l (RPM)
I - 2 Spindle Speed Control (RPM)
Milling Systems
The Mill Spindle Speed Control is for milling systems only, and
provides an open loop spindle speed control.
The spindle speed control requires the CSS I/O box.
8
Define the last axis as a rotary encoder axis.
Display
8
Define the display as a speed display.
The spindle speed control is only available for milling
systems. If the DRO is configured for a turning system,
then no Spindle Settings will be displayed.