Mill spindle installation setup, I - 2 spindle speed contr o l (rpm) – ACU-RITE CSS I/O Users Manual User Manual
Page 11
CSS I/O
9
I - 2 Spindle Speed Contr
o
l (RPM)
Mill Spindle Installation setup
The configuration parameters are found under Installation Setup. The
Spindle Settings only appear in the list if the CSS I/O box is detected.
8
Select Spindle Settings from the Installation Setup menu, and press
the ENTER key.
The spindle (RPM) status field allows the user to enable, or disable the
spindle (RPM) fuctionality. If it is disabled, then no spindle (RPM)
operations are available for usage. If the spindle (RPM) is enabled,
then all of the following setup must be completed. Six (6) generic
switching outputs will then be available.