A2Z Ozone AQUA TOUCH - Manual (Page 4)

4
Operating Instructions:
1. Connect the unit to a power outlet. The unit will come on with the display illuminated
and the clock showing 12:00. Set the clock to correct time by pressing the time display to
be changed and then pressing the triangular up or down arrows buttons. Please note,
turning the unit on or off with the On/Off power button does not change the clock setting,
as long as the power cord remains connected.
2. Connect the unit to the aerator and turn the faucet on.
The unit will automatically sense water running through
the aerator and will produce ozone. The colorful fan-
shaped display radiates actively outward whenever ozone
is being produced.
3. When ozone starts being produced, the clock changes to a timer, displaying the time of
last period the last ozone production. Turning off the faucet, the On/Off switch stops and
resets the timer to zero.
4. To adjust the amount (density) of ozone being produced, just press the triangular up or
down arrow buttons. This may be done with or without the water running.
5. The red warning light with a triangle symbol will flash if there is an internal problem. If
this happens, turn off the power button, disconnect the power button and try again.
Dynamic display,
radiates to indicate
ozone is being
produced
Ozone density
display
DOWN Arrow
button, for setting
clock and decrease
ozone density
Clock and
timer
UP Arrow button, for
setting clock and
increase ozone density
Malfunction warning
light
On/Off power
switch button