Blaupunkt Dsseldorf C50 - Manual (Page 23)

45
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Switching the equalizer on/off
➮
To switch the equalizer on, press
and hold down EQ
<
until EQ
lights up in the display and “EQ
ON” appears briefly.
➮
To switch the equalizer off, press
and hold down EQ
<
until EQ no
longer lights up in the display and
“EQ OFF” appears briefly.
Adjusting the equalizer
➮
Press EQ
<
.
“LOW EQ” will appear in the display.
➮
Press or
:
to select either
“LOW EQ” or “HIGH EQ”.
➮
Press or
:
to adjust the
gain.
➮
Press or
:
to select the fre-
quency range.
➮
To select the next frequency, press
OK
;
first and then
:
.
➮
Once you have completed making
all of the necessary adjustments,
press EQ
<
.
Equalizer
This car audio system is equipped with
a parametric 2-band equalizer. For
“LOW EQ” the gain can be set to a fre-
quency between 60 to 100 Hz. For
“HIGH EQ” the gain can be set to a fre-
quency between 10000 and 17500 Hz.
As a result, it is possible to significantly
influence the in-vehicle acoustics.
Notes on making equalizer
settings
We recommend that you use a cassette
or CD (if a CD changer is connected)
you are familiar with to make the set-
tings.
Before you set the equaliser, set bass,
treble, balance and fader to “0” and de-
activate the Loudness function. For
more information on how to do this, re-
fer to the section on “Tone and balance/
fader”.
➮
Now listen to the cassette or CD
you have selected.
➮
Evaluate the sound according to
your own personal preferences.
➮
Now refer to “Sound impression” in
the following table.
➮
Make the settings for the equalizer
as described under “What to do”.
EQUALIZER