Blaupunkt Dsseldorf C50 - Manual (Page 16)

38
Tape deck operation
Starting tape deck operation
●
If there is no cassette in the tape
deck,
➮
press
9
.
The flip release panel will open.
➮
Insert a cassette into the tape deck
with the open side facing towards
the right.
➮
Close the operating panel.
Cassette playback will begin with the
side facing upwards.
●
If there already is a cassette insert-
ed into the tape deck,
➮
press CD•C
@
repeatedly until
“CASSETTE” appears in the dis-
play.
Playback will resume on the side of the
tape which was played last.
Cassette eject
➮
Press
9
.
The flip release panel will open and the
cassette will eject.
➮
Remove the cassette and close the
operating panel.
OR
➮
Insert a different cassette.
Changing cassette sides
➮
To switch from SIDE A to SIDE B
and vice versa, press 2
>
.
Note:
Once the tape reaches the end, it will
automatically switch to the other side
(autoreverse).
Skipping music tracks (S-CPS)
➮
To select the next or other following
tracks, press
:
once or as
many times as required.
“CPS FF” and the number of tracks you
want to skip will appear in the display.
The tape will fast forward to the next or
following track as selected.
➮
To restart the current track or select
one of the previous tracks, press
:
once or as many times as re-
quired.
“CPS FR” and the number of tracks you
want to skip will appear in the display.
The tape will rewind to the beginning of
the current track or to one of the previ-
ous track as selected.
Repeating music tracks
➮
Press 4 RPT
>
.
The track currently playing will repeat.
RPT will light up in the display. When
the tape rewinds back to the beginning
of the track, “REPEAT TRCK” will ap-
pear in the display.
➮
To stop repeating the track, press
4 RPT
>
again.
Playback will resume normally. RPT will
disappear from the display.
TAPE DECK OPERATION