Storage – Echo 99944200620 User Manual
Page 19
99944200620
STORAGE
X7532093905
19
© 10/2013 ECHO Inc.
STORAGE
1. Remove ProPaddle sweeper drum assemblies and drum
axles.
Do not immerse the gearcase or driveshaft in water. Water will
enter gear housing and damage gears, bearings and seals.
2. Inspect ProPaddle belts and fins for excessive wear and
damage. Have Echo dealer replace paddle belts if fins are
worn excessively or distorted, or if belts are damaged.
3. Clean ProPaddle sweeper drums and reusable belts with
water.
4. Insert plastic drum axles into drums, and install assembly
hardware on axles to avoid loss during storage.
5. Stand drums on outer ends to prevent paddle fins from
deforming during storage.
6. Apply a thin coating of oil to gearcase output shafts to
prevent rust.
7. Lubricate lower drive shaft with grease. (Refer to Lubrication
instructions.)
8. Store ProPaddle components in a cool, dry place. Store
gearcase/ lower driveshaft assembly with gearcase down to
prevent lubricant leakage from open shaft end.
DO NOT allow ProPaddle attachment to rest on paddle fins
during prolonged storage, or fins may become flattened.