Echo EA-410 - Manual (Page 20)

20 X7504220703
© 10/2013 ECHO Inc.
OPERATION EA-410
Drilling
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position
unit so that exhaust is directed away from your face and body.
1. After starting engine, position auger upright at desired
drilling point.
2. Position feet for a stable stance, away from auger blades.
3. Firmly grip Throttle Handle and support handle.
4. Slowly squeeze throttle trigger to engage clutch and rotate
auger. Apply light downward pressure on handles to drill
hole. Periodically, raise the auger to help clear drilling debris
from the hole.
5. Overloading the auger during drilling may cause it to stop
turning. When this occurs, lift the auger to reduce the
drilling load on the engine, and allow drilling debris to be
augered out of the hole. Resume drilling.
While drilling, the auger may twist suddenly and forcefully if it
contacts large rocks, roots, or other hidden obstacles. Release
throttle trigger immediately, and lift auger out of hole. Clear the
obstacles to prevent damage, and then resume drilling.
6. Drilling holes six inches in diameter or larger may be easier
if two people hold the handles on opposite sides.
7. Two-man Operation - The operator (A), guides the auger
while gripping the Throttle Handle Assembly and lower hand grip. The helper (B), assists by guiding
auger while gripping loop handle on opposite side of auger.
8. Do not place excessive body weight on the unit. Allow auger
to drill with a shaving action using light downward pressure.
9. Do not use an ice auger in earth, or an earth auger in ice. A
different style of auger is required for each type of drilling.
10. Do not operate unit in excessively rocky ground.
Never operate auger with handles above chest height,
otherwise you could lose control, resulting in serious personal injury.
During operation, the muffler or catalytic muffler and surrounding cover become hot. Always keep
exhaust area clear of flammable debris during use, otherwise serious property damage or personal
injury may result.