Stopping engine, Ea-410 operation – Echo EA-410 User Manual

Page 19

Text mode
Original mode

EA-410

OPERATION

X7504220703

2. Purge Bulb

Pump purge bulb (E) until fuel is visible in the “Clear” fuel
return line.

3. Decompression Button

Press decompression button (D) once.

4. Recoil Starter

Lay the unit on a flat, clear area, and pull the recoil starter
handle (A) until the engine fires.

Note: If engine does not start after 5 pulls, use Cold Start Procedure.

Stopping Engine

1. Throttle

Allow engine to return to idle before shutting off engine.

2. Stop Switch

Move stop switch button (B) backward to “STOP” position.

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall
engine. Have your ECHO dealer repair stop switch before
using unit again.