beautypg.com

Service & maintenance, Warning, Frequency – Echo 73454 Owners Manual v.3 User Manual

Page 27

background image

4 INCH CHIPPER

25

Section

Service & mainTenance

4

Warning

To prevent personal injury or property damage, shut
off power source, disconnect spark plugs, and make
sure all moving parts have come to a complete stop

before servicing, adjusting or repairing.

4.1 mainTenance Schedule

the items in the service and maintenance schedule are
to be checked, and if necessary, corrective action taken.
this schedule is designed for units operating under nor-
mal conditions. If the unit is operating in adverse or se-
vere usage conditions, it may be necessary for the items
to be checked and serviced more frequently. See the en-
gine owners manual for further engine maintenance and
troubleshooting problems.

freQuencY

comPonenT

mainTenance

reQuired

refer To

engine

oPeraTor

manual

everY 8

hourS

everY

25

hourS

everY

50

hourS

everY

200

hourS

everY

Year

aIR ClEanER

ChECk and ClEan (1)

aIR IntakE

ClEan (1)

EngInE oIl

ChangE (1)

FuEl FIltER

REplaCE

SpaRk plug

ChECk CondItIon/gap

EngInE oIl

ChECk

FuEl tank

FIll

ChIppER anvIl

ChECk 1/16" to 1/8" ClEaR-
anCE and RE-toRQuE to
75 Ft-lBS. (2)

ChIppER BladES

ChECk ShaRpnESS and
RE-toRQuE to 25 Ft- lBS.
(2)

all IntERnal and
ExtERnal nutS and
BoltS

RE-toRQuE pER aSSEMBly
toRQuE ChaRt

BElt CondItIon

ChECk

BElt tEnSIon

ChECk

gREaSE ZERkS

luBE

EntIRE MaChInE

ClEan

WhEEl BEaRIngS

ChECk and REpaCk

pto CRoSS JouRnalS

luBE

pto InnER tuBES

luBE

pto ShIEld REtaInIng
BEaRIng

luBE

(1) pERFoRM MoRE FREQuEntly undER ExtREMEly duSty CondItIonS.

(2) pERFoRM MoRE FREQuEntly WhEn ChIppIng dRy oR dIRty Wood.

as the chipper limited Warranty states, failure by the owner to perform normal maintenance will void the machine's
warranty. The aggressive, high-speed nature of chipping reQuireS The oWner To Perform The above liSTed
normal mainTenance. Special consideration to maintain and re-torque the chiPPer anvil, chiPPer bladeS,
and all inTernal and exTernal nuTS and bolTS is the sole responsibility of the owner. failure by the owner to
do so shall be cause for denied warranty.