Assembly, 1 attach chute and support, 2 attach discharge tube deflector – Echo 74554 Owners Manual v.3 User Manual
Page 10
![background image](/manuals/553352/10/background.png)
6
5 INCH CHIpper
seCTion
2
assemblY
Mount the feed chute to the chipper housing using six
1.
(6) 3/8 x 1-1/4" carriage bolts, 3/8" washers, and 3/8"
nylock nuts (see Figure 2.1).
Secure the chute support to the chipper leg stand with
2.
2.1 aTTaCH CHuTe and suPPorT
FEED CHUTE
EXTENSION
FEED
CHUTE
SUPPORT
BRACKET
FEED CHUTE
EXTENSION
FEED
CHUTE
CHUTE
SUPPORT
Figure 2.1 Attach the chipper chute and chute support
5/16 x 1”
BOLT
5/16 x 1-3/4”
BOLT
5/16”
NYLOCK
NUT
DEFLECTOR
KNOB
3/8 X 1-1/4”
HEX BOLT
3/8”
NYLOCK
NUT
one (1) 3/8 x 2-3/4" bolt, one 3/8" washer, and one
3/8" nylock nut as shown in Fig. 2.1.
Secure the other end of the chute support by removing
3.
the middle bolt holding the feed chute to the hinge
(shown in Fig 2.1 insert). Put the support bracket end
between the washer and the hinge, and then retighten
the bolt and nut.
2.2 aTTaCH disCHarge Tube
defleCTor
Figure 2.2 Attach the discharge tube deflector
Attach the deflector to the discharge tube with (2) 1-3/4"
bolts, (2) 1" bolts, (2) deflector knobs, (4) 5/16" nylock
nuts, and (8) 5/16" washers as shown in Figure 2.2.