6 safety decals – Echo CH450H Owners Manual v.1 User Manual
Page 7
3
4.5 INCH HYDRAULIC CHIPPER
SAFETY
1.6 saFety decals
1
See Section 1.5 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. decals that need replacement must be applied to their original locations.
2
pn 12169
KeeP haNdS aNd Feet out oF iNlet aNd
diSChaRge oPeNiNgS While MaChiNe
iS oPeRatiNg to avoid SeRiouS
PeRSoNal iNJuRy. StoP aNd alloW
MaChiNe to CoMe to a CoMPlete StoP
BeFoRe CleaRiNg oBStRuCtioNS.
pn 12169
3
Read aNd uNdeRStaNd thiS
oWNeR/oPeRatoRS MaNual.
Be CoMPletely FaMiliaR
With the CoNtRolS aNd
the PRoPeR uSe oF thiS
eQuiPMeNt
oBtaiN aNd WeaR SaFety
glaSSeS aNd uSe heaRiNg
PRoteCtioN at all tiMeS
WheN oPeRatiNg thiS
MaChiNe.
BeFoRe iNSPeCtiNg oR
SeRviCiNg aNy PaRt oF thiS
MaChiNe, Shut oFF PoWeR
SouRCe, diSCoNNeCt SPaRK
Plug WiRe FRoM SPaRK Plug
aNd MaKe SuRe all MoviNg
PaRtS have CoMe to a
CoMPlete StoP.
pn 12172
4
pn 12173
do Not oPeRate thiS eQuiPMeNt iN the viCiNity oF
ByStaNdeRS. do Not alloW ChildReN to oPeRate thiS
eQuiPMeNt. alWayS StaNd CleaR oF diSChaRge aRea WheN
oPeRatiNg thiS MaChiNe. KeeP FaCe aNd Body aWay FRoM
diSChaRge aReaS.
pn 12173
CheCK Blade BoltS
FoR PRoPeR toRQue
aFteR eveRy 8 houRS
oF oPeRatioN. CheCK
BladeS aNd Rotate oR
ReShaRPeN daily oR
aS ReQuiRed to KeeP
BladeS ShaRP. ReFeR
to oWNeRS MaNual
FoR iNStRuCtioNS. FailuRe to do So May CauSe PooR
PeRFoRMaNCe, daMage oR PeRSoNal iNJuRy aNd Will void
the MaChiNe WaRRaNty.
pn 14942-00
KeeP haNdS aNd Feet out
oF iNlet aNd diSChaRge
oPeNiNgS While MaChiNe
iS oPeRatiNg to avoid
SeRiouS PeRSoNal
iNJuRy. StoP aNd alloW
MaChiNe to CoMe to a
CoMPlete StoP BeFoRe
CleaRiNg oBStRuCtioNS.
p/n 12175
6
7
pn 14942-00
pn 12175
pn 12250
pn 13890-00
KeeP haNdS aNd Feet out oF iNlet aNd diSChaRge
oPeNiNgS While MaChiNe iS oPeRatiNg to avoid SeRiouS
PeRSoNal iNJuRy. StoP aNd alloW MaChiNe to CoMe to a
CoMPlete StoP BeFoRe CleaRiNg oBStRuCtioNS.
5
Read aNd uNdeRStaNd you oWNeRS MaNual BeFoRe
oPeRatiNg. iF oWNeRS MaNual WaS Not iNCluded oR
you have aNy QueStioNS, PleaSe Call 800.247.7335
oR 701.282.5520 (u.S.a.)