Belkin F5D5730au - Manual (Page 12)

INSTALLATION
9
2. Your screen will look like this.
2a. Click on “Submit” and your screen will look like this:
3. For New Zealand users, change the “VPI” to “0” and the “VCI” to “100”—by
default this is set to 8/35.
For Australian users, the “VPI” is “8” and the “VCI” is “35” as its default.
4. Under the heading PPP on the right you will see the following:
5. Enter the following personal details as given to you by your ISP: