Echo CH8670H Owners Manual v.2 - Manual (Page 8)

4 TURNTABLE CHIPPER
SAFETY
1.9 SaFETY dEcaLS
kEEP HANDS AND FEET OuT
OF INlET AND DISCHARgE
OPENINgS WHIlE MACHINE
IS OPERATINg TO AVOID
S E R I O u S P E R S O N A l
INJuRy. STOP AND AllOW MACHINE TO COME TO A
COMPlETE STOP BEFORE ClEARINg OBSTRuCTIONS.
pN 12175
5
3
pN 12173
DO NOT OPERATE THIS
EQuIPMENT IN THE VICINITy OF
BySTANDERS. DO NOT AllOW
CHIlDREN TO OPERATE THIS
EQuIPMENT. AlWAyS STAND
ClEAR OF DISCHARgE AREA
WHEN OPERATINg THIS MACHINE. kEEP FACE AND BODy
AWAy FROM DISCHARgE AREAS.
pN 14942-00 7
1 pN 12169
kEEP HANDS AND FEET OuT OF INlET AND
DISCHARgE OPENINgS WHIlE MACHINE
IS OPERATINg TO AVOID SERIOuS
PERSONAl INJuRy. STOP AND AllOW
MACHINE TO COME TO A COMPlETE STOP
BEFORE ClEARINg OBSTRuCTIONS.
2
READ AND uNDERSTAND THIS
OWNER/OPERATORS MANuAl.
BE COMPlETEly FAMIlIAR
WITH THE CONTROlS AND
THE PROPER uSE OF THIS
EQuIPMENT
OBTAIN AND WEAR SAFETy
glASSES AND uSE HEARINg
PROTECTION AT All TIMES
WHEN OPERATINg THIS
MACHINE.
BEFORE INSPECTINg OR
SERVICINg ANy PART OF THIS
MACHINE, SHuT OFF POWER
SOuRCE, DISCONNECT SPARk Plug WIRE FROM SPARk
Plug AND MAkE SuRE All MOVINg PARTS HAVE COME
TO A COMPlETE STOP.
pN 12172
pN 12174
DO NOT OPERATE MACHINE WITHOuT
SHIElDS IN PlACE. FAIluRE TO DO
SO MAy CAuSE SERIOuS INJuRy OR
DEATH.
4
C H E C k B l A D E B O lT S
FOR PROPER TORQuE
AFTER EVERy 8 HOuRS
OF OPERATION. CHECk
BlADES AND ROTATE OR
RESHARPEN DAIly OR AS REQuIRED TO kEEP BlADES
SHARP. REFER TO OWNERS MANuAl FOR INSTRuCTIONS.
FAIluRE TO DO SO MAy CAuSE POOR PERFORMANCE,
DAMAgE OR PERSONAl INJuRy AND WIll VOID THE
MACHINE WARRANTy.
pN 12250 6
DO NOT OPERATE CHIPPER
WITHOuT TuRNTABlE
BASE lOCkED IN PlACE.
FAIluRE TO DO SO MAy
RESulT IN DAMAgE TO
MACHINE AND/OR SERIOuS
BODIly INJuRy.
FOR TRANSPORT, RETuRN
CHIPPER TO TRANSPORT POSITION, INSERT TRANSPORT
SAFETy PIN AND ClIP, AND SET TuRNTABlE BRAkE
HANDlE TO lOCkED POSITION. FAIluRE TO DO SO MAy
RESulT IN DAMAgE TO MACHINE AND/OR SERIOuS BODIly
INJuRy.
pN 18606-00
8
18
60
6-
00
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. decals that need replacement must be applied to their original locations.