IOGear GWA502 Manual - Manual (Page 43)

40
Configuration Utility
After installed, the Windows WPA Client will update the
wireless network configuration dialog boxes to support new
WPA options.
1. Click Connect To>Wireless Network Connection
to bring up the dialogue window of Wireless
Network Connection Status. Click the
Properties box to bring up next dialogue window.
2. In the Wireless Network Connection Properties
window, under Wireless Networks tab, please
check the box of “Use Windows to configure my
wireless network settings” to turn on the
Wireless Zero Configuration service. Select the
wireless access point you want to associate to,
then click Configure box at the right side to bring
up next dialogue window.