IOGear GWA502 Manual - Manual (Page 39)

• Encryption:
- WEP Configuration
36
Configuration Utility
Click the drop-down menu to select WEP to enable
the WEP function and select 64 bits or 128 bits. The
128 bits gives a higher level of security. The
selection must be the same between all connected
network devices. For 64-bit WEP key, it should be
five ASCII characters (a-z and 0-9, for example:
gear56) or ten hexadecimal digits in length (a
through f, and 0 through 9, for example:
2af30bc9d5); for 128 bit WEP key, the length will be
13 characters for ASCII or 26 digits for Hexadecimal.
WEP keys 1-4 enable you to create an encryption
scheme for wireless LAN transmissions.