IOGear GWA502 Manual - Manual (Page 20)

17
Quick Installation
a. Cable Modem and DHCP Client - If your broadband
access is through a cable modem, or if your IP
address is automatically assigned by your service
provider or a DHCP server, you should choose this
type.
• If your ISP gave you a Host Name or a MAC
address, you can enter them on the following
page.
b. Static IP - xDSL - If your broadband access is
through an xDSL modem and your ISP assigned
you a static IP Address, you should choose this type.
• Please enter the necessary information such as
the IP Address, Subnet Mask, Default Gateway
and DNS server that your ISP provided in the
following page.
c. Dynamic IP - If your broadband access is through
an xDSL modem and your ISP did not assign you a
static IP Address, you should choose this type.
• Please enter the necessary information such as
username and password your ISP provided in the
following page. If your ISP gave you a service
name, you should enter it in the following page.
d . Dynamic IP (European countries) - If your
broadband access is through an xDSL modem and
your ISP did not assign you a static IP Address,
you should choose this type.
• If your Internet Service Provider requires the use
of PPTP, enter the information. (PPTP is generally
more popular in Europe.)
After you have entered your ISP’s configuration
settings, click Next.