IOGear GHSW8242 Quick Start - Manual (Page 6)

Rack Mounting
Step 1
Remove the screws from
the left and right sides of the
switch (2 screws total) near
the front of the switch.
Step 2
Use the M3 x 8 Phillips
hex head screws
supplied with the rack
mounting kit to screw
the rack mounting
brackets into the sides
near the front of the unit.
Final Step
Place the switch in the
rack. Position it so that
the holes in the mounting
brackets line up with the
holes in the rack. Secure
the mounting brackets to
the front of the rack
(screws not included).
ARC
POWER
IR
ARC
POWER
IR
ARC
POWER
IR
5 4