IOGear GCS712U - Manual (Page 15)

Operation
12
Auto Scan Mode
The GCS712U’s Auto Scan feature automatically switches the KVM focus between the
two computers at regular intervals so that you can monitor their activity without having to
take the trouble of switching yourself. The default time interval is 5 seconds. To invoke
Auto Scan Mode:
Press and release the Left Shift key; then press and release the Right Shift key:
[Left Shift] [Right Shift]
Once scanning begins, it continues until you press the [Spacebar] to exit Auto Scan
Mode. The port that was currently active at the time scanning stopped remains active.
Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are
suspended. You must exit Auto Scan Mode by pressing the [Spacebar] in order to regain
normal control of their use.