IOGear GCS642U - Manual (Page 13)

13
Basic KVM Operations
Port Switching
Tap the Scroll Lock key twice to the toggle the
KVM, USB, and Audio focus between the two
ports.
Note: If you prefer, you have the Ctrl key be the
toggle key (see Hotkey Summary Table, page 14)
Mouse Port Selection
Simply double-click the scroll wheel on your USB
mouse to switch between ports. The mouse port-
switching function allows you to toggle back and
forth between the ports.
1. This feature is only supported by USB 3-key
scroll wheel mice.
2. The default setting is OFF.
3. This feature is only supported when mouse
emulation is also enabled.
Hotkey Port Selection
All hotkey operations begin by invoking hotkey
mode:
1. Hold down the Num Lock key.
2. Press and release the minus key.
3. Release the Num Lock key..
Note: If using [Num Lock] conflicts with other
programs, [Ctrl] can be used instead (see Hotkey
Summary Table, page 14)