IOGear GCS632UW6 Manual - Manual (Page 16)

16 17
NOTE:
If using the Num Lock and Minus key to invoke
Hotkey function is not optimal, refer to the next
page for instructions on changing the hotkey
invocation keys.
When Hotkey Mode is active, ordinary keyboard
and mouse functions are suspended – only
Hotkey compliant keystrokes can be input. At
the conclusion of some hotkey operations, you
automatically exit Hotkey mode. With some
operations, you must exit manually by pressing
the
Esc or Spacebar on your keyboard.
Switching Ports
You may also switch ports on the KVM by doing
the following:
1. Invoke Hotkey Mode
2. Press and release the computer’s port
number (1 or 2)
3. Press [Enter]
The KVM focus switches to the specified port
and automatically exits Hotkey mode