IOGear GCS632UW6 Manual - Manual (Page 12)

12 13
Hotkey Setting Mode (HSM)
For all Hotkey operations, you must use the
number keypad on the right side of your
keyboard
To Invoke Hotkey Mode (PC-Compatible
Keyboard):
1. Press and hold down Num Lock key
2. While holding down Num Lock key, also
press down Minus key ( - ) for one second
3. Release minus key and within one second,
release Num Lock key
Port Switching
To toggle between the two computers, quickly
tap the Scroll Lock key twice:
[Scroll Lock], [Scroll Lock]
NOTE 1: Please make sure the keyboard
is plugged into the keyboard port on the
KVM; otherwise the hotkeys will not work.
Keyboard and mouse ports are labeled on
the bottom side of the KVM with a small
picture of a keyboard and mouse.
NOTE 2: You can change this hotkey to [ctrl]
[ctrl].