IOGear GCS632UW6 Manual - Manual (Page 14)

14 15
To Invoke Hotkey Mode (Mac Keyboard):
1. Press and hold Clear key for two seconds
2. Press and hold Minus key [ – ] key for one
second
3. Release Minus key [ – ] and within one
second also release Clear key
The KVM will now enter Hotkey mode; indicated
by blinking of the Caps Locks LED. On some
Mac keyboards, this LED is on the Caps Lock
key itself.
If the KVM did not enter Hotkey mode, repeat
the above procedure keeping in mind that this
procedure must be done quickly and in the
time-frame indicated.