IOGear GCS1204G User Manual

Page 34

Starting the Upgrade
1. Run the downloaded Firmware Upgrade Package file – either by double clicking the file icon, or using a

command line to enter the full path. The Firmware Upgrade Utility Welcome screen appears:

2. Read the License Agreement (click the I Agree button).
3. Click Next. The Firmware Upgrade Utility main screen appears. The Utility inspects your installation. All

the devices capable of being upgraded by the package are listed in the Device List panel.

4. As you select a device in the list, its description appears in the Device Description panel. After you have

made your device selection(s), Click Next to perform the upgrade. If you enabled Check Firmware
Version, the Utility compares the device’s firmware level with that of the upgrade files. If the device’s
version is higher than the upgrade version, a dialog box gives you the option to Continue or Cancel.

If you didn’t enable Check Firmware Version, the Utility installs the upgrade files without checking whether
they are a higher level, or not.