BURY CL 1010 Time - Manual (Page 12)

12
Operating guidelines
Now connect the CL 1010 Time with your PC using the USB cable. You will find a USB jack on the side
of the main unit of the CL 1010 Time.
A detailed installation guide and a description of the BURY Time Suite are also provided on the DVD.
Using the software, you are able to complete your tour data, change the system setting, enter a driver
ID or activate the system’s integrated warning function prior to danger zones.
Please note:
The danger zones that are included are provided by X
the third party company Eifrig Media. You can download
updates to this data against payment at the internet site
www.scdb.info.
A warning sound is emitted every time you approach a X
danger zone.
Important:
Please ensure you pay attention to and comply with the X
road traffic laws and regulations which are in force in the
countries in which you want to use this software! You don’t
have to worry, however, if you use the system in the conditi-
on as it is supplied, as this function is not yet activated.
If the CL 1010 Time is attached to a PC, the green LED flashes briefly. During this time, the identifica-
tion data are read out and the CL 1010 Time is initialized on the PC. After this process, the green LED
illuminates constantly. If you import the position data into the BURY Time Suite or reset the CL 1010
Time to its factory settings, the green LED flashes again. During these situations, please do not inter-
rupt the connection between the PC and the CL 1010 Time.
If you activated the danger zones warning function, then you are also able to set the volume level
adjuster of the integrated Piezo (acoustic sound emitter). If you press down and hold the push button
for approx. three seconds, then the signal gets louder on a second-by-second basis. Once the maxi-
mum volume is reached, the reproduction automatically starts at the lowest setting once again.