I.R.I.S. IRISPen Express 7 - Manual (Page 2)

English English
3. Getting Started with the IRISPen™
Step 1: Connect the IRISPen™
Plug in the IRISPen™ in a free USB port (USB 2.0 or higher). If the driver is installed successfully, a balloon
message appears in the System Tray.
Step 2: Start the application
Double‐click the IRISPen™ 7 shortcut on the Desktop.
When you start IRISPen™ 7 for the first time, a Welcome screen
appears to help you on your way.
Step 3: Watch the Tutorial
In the Welcome screen, click Next to start the Tutorial.
The Tutorial shows you how to scan.
Step 4: Select the Scan Direction
When you have watched the Tutorial, click Next to choose the Scan Direction.
The direction in which you scan depends on whether you are right‐handed or left‐handed. Therefore, you need
to select the scanning hand.
To change the scanning hand later on in the IRISPen™ ribbon:
1. Click the settings icon in the bottom right corner.
2. Click the Personalizing tab.
3. Select the scanning hand.
‐ Select Right hand to scan lines from left to right.
‐ Select Left hand to scan lines from right to left.
Step 5: Practice your Scanning
Click Next to display the Practice screen. Here you can practice your scanning and see what the results look like.
1. In the ribbon, select the language of your documents.
2. Click and slide the IRISPen™ over a line of text
and check the results.
Tip: in this screen you can watch the Tutorial again, and
also a Demo.
When you are done practicing you can do some actual
scanning.