JLG 260MRT ANSI Service Manual - Manual (Page 64)

SECTION 2 - PROCEDURES
2-42 – JLG Lift – 3121108
TABLE 2-13 APPLIES TO MACHINES WITH 4170044 SOFTWARE.
1. The Model and Market configuration must be com-
pleted before any Personality settings can be
changed.
2. The Leveling Jacks configuration must be set to YES
for standard 260MRT equipped with leveling jacks
(>325PSI set / <200 PSI unset). This configuration
must be set to YES SPL LENGTH for 260MRT with
optional special length jacks (>200PSI set / <50 PSI
unset).
3. The Tilt Configuration setting is assigned a default
based on Market selection. This configuration must
be set to 6 DEG F-R SPL for special option vehicles
for Australia that are capable of +/-6° chassis tilt
front to rear.
Table 2-13. Machine Configuration Programming Information - 4170044 Software
Configuration Digit Number Description
Market Default
0 1 2 3 4
MODEL
0
1 260 MRT Gas/LP
260MRT Diesel
0
MARKET
0
1
2
3
4 ANSI
ANSI EXPORT
CSA
CE
AUSTRALIA
0
LEVELING JACKS
0
1
2 NO
YES
YES SPECIAL LENGTH
0
TILT CONFIG
0
1
2 3 DEGREES - F-R
5 DEGREES - F-R
6 DEGREES - F-R SPECIAL
1 1 0 1 1
LOAD
0
1
2 NO
CUTOUT PLATFORM
CUTOUT ALL
0 1 0 1 1
1001113688_C