beautypg.com

Machine inspection, 3 operation, General – JLG 860SJ Operator Manual User Manual

Page 13: Machine inspection -3, Operation -3, General -3, 3 operation general

background image

SECTION 1 - SAFETY PRECAUTIONS

3121630

– JLG Lift –

1-3

Machine Inspection

• Do not operate this machine until the inspections and func-

tional checks as specified in Section 2 of this manual have
been performed.

• Do not operate this machine until it has been serviced and

maintained according to the maintenance and inspection
requirements as specified in the machine’s Service and Main-
tenance Manual.

• Ensure all safety devices are operating properly. Modification

of these devices is a safety violation.

MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL BE MADE
ONLY WITH PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER.

• Do not operate any machine on which the safety or instruction

placards or decals are missing or illegible.

• Check the machine for modifications to original components.

Ensure that any modifications have been approved by JLG.

• Avoid accumulation of debris on platform floor. Keep mud, oil,

grease, and other slippery substances from footwear and plat-
form floor.

1.3

OPERATION

General

• Machine operation requires your full attention. Bring the

machine to a full stop before using any device, i.e. cell phones,
two-way radios, etc. that will distract your attention from
safely operating the machine.

• Do not use the machine for any purpose other than position-

ing personnel, their tools, and equipment.

• Before operation, the user must be familiar with the machine

capabilities and operating characteristics of all functions.

• Never operate a malfunctioning machine. If a malfunction

occurs, shut down the machine. Remove the unit from service
and notify the proper authorities.

• Do not remove, modify, or disable any safety devices.

• Never slam a control switch or lever through neutral to an

opposite direction. Always return switch to neutral and stop
before moving the switch to the next function. Operate con-
trols with slow and even pressure.

• Do not allow personnel to tamper with or operate the

machine from the ground with personnel in the platform,
except in an emergency.

This manual is related to the following products: