1 introduction, 2 operating specifications, Introduction -1 – JLG 860SJ Operator Manual User Manual
Page 93: Operating specifications -1
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121630
– JLG Lift –
6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1
INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121631
Illustrated Parts Manual ...............................................................3121632
6.2
OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
Maximum Work Load (Capacity)
ANSI
Unrestricted:
Restricted
500 lb (227 kg)
Refer to Capacity Decals on machine for
restricted platform capacities
Maximum Work Load (Capacity)
CE & Australia
Unrestricted:
Restricted
500 lb (230 kg)
Refer to Capacity Decals on machine for
restricted platform capacities
Maximum Capacity - Dual Rating
ANSI
800S
860SJ
1000 lb. (454 kg)
750 lb. (340 kg)
Maximum Capacity - Dual Rating
CE & Australia
800S
860SJ
1000 lb. (450 kg)
750 lb. (340 kg)