JLG 41AM (3120752) Service Manual - Manual (Page 36)

SECTION 2 - SERVICE PROCEDURES
2-12 – JLG Lift – 3120752
2.6 HYDRAULIC LIFT PUMP - SERVICING
Remove hydraulic pump from machine.
FENNER BRAND PUMP - Brush Replacement
Motor Cap/Motor Installation
Motor Brush Installation
Motor Cap Installation
1. Cap Assembly Screws 2. Cap Assembly
Motor Installation
1. Motor Assembly 3. Pump End Head
2. Motor Assembly Screws 4. Motor to Pump Coupler
1
2
1
2
3
4
Brush Housing Installation
1. Brush Housing
2. Brush Housing Screws
3. Mark Front of Motor and Brush Housing for reference
when reassembling.
Brush Assembly Connections
1. Negative (–) Post 3. Brush Assemblies
2. Positive (+) Post 4. Spring Washer
Note: Length of wires to brush assemblies shown exaggerated for
illustrative purposes.
1
2
3
1
2
3
3
4