Behringer DSP1424P - Manual (Page 7)

7
ULTRAMIZER PRO DSP1424P
The mains connection of the ULTRAMIZER PRO is made by using the supplied cable. It meets all of the
international safety certification requirements. Please make sure that all units have a proper ground connec-
tion.
+
Before you connect your ULTRAMIZER PRO to the mains, please make sure that your local
voltage matches the voltage required by the unit (see chapter 6 “SPECIFICATIONS” for details)!
As a standard the audio inputs and outputs on the BEHRINGER ULTRAMIZER PRO are fully balanced. If
possible, connect the unit to other devices in a balanced configuration to allow for maximum interference
immunity. The automatic servo function detects unbalanced connections and compensates the level difference
automatically (6 dB correction).
The MIDI links (IN/OUT/THRU) are made over standardized DIN patch cords. The data communication is
isolated from ground by an opto-coupler.
1.3 Control elements