JLG 80HX_HX+6_HXER Service Manual - Manual (Page 15)

SECTION 1 - SPECIFICATIONS
3120863 – JLG Lift – 1-5
Lubrication Specifications
Refer to Lubrication Chart for specific lubrication proce-
dures.
NOTE: The lubrication intervals in the following paragraphs
are equivalent to the following:
150 hours = 3 months
300 hours = 6 months
600 hours = 1 year
1200 hours = 2 years
Table 1-3. Mobil EAL 224 H Specs
Type Biodegradable Vegetable Oil
ISO Viscosity Grade 32/46
Specific Gravity .922
Pour Point, Max -25°F (-32°C)
Flash Point, Min. 428°F (220°C)
Weight
7.64 lb. per gal.
(0.9 kg per liter)
Viscosity
at 104° F (40° C) 37 cSt
at 212° F (100° C) 8.4 cSt
Viscosity Index 213
Operating Temp 0-180° F (-17 - -162°C)
Note: Must be stored above 32° F (14° C)
Table 1-4. Mobil DTE 13M Specs
Type Petroleum Base
ISO Viscosity Grade 32
Specific Gravity .877
Pour Point, Max -40°F (-40°C)
Flash Point, Min. 330°F (166°C)
Viscosity
at 104° F (40° C) 33 cSt
at 212° F (100° C) 6.5 cSt
Viscosity Index 140
Table 1-5.Lubrication Specifications
KEY SPECIFICATIONS
MPG Multipurpose Grease having a minimum dripping point of 350
degrees F. Excellent water resistance and adhesive qualities;
and being of extreme pressure type (Timken OK 40 pounds
minimum).
EPGL Extreme Pressure Gear Lube (oil) meeting API Service Classi-
fication GL-5 or Mil-Spec Mil-L-2105.
HO Hydraulic Oil. API Service Classification GL-3, SAE 10W-20,
Viscosity Index 152.
EO Engine (crankcase) Oil. Gas - API SF/SG class, MIL-L-2104.
Diesel - API CC/CD class, MIL-L-2104B/MIL-L-2104C.