JLG 80HX_HX+6_HXER Service Manual - Manual (Page 11)

SECTION 1 - SPECIFICATIONS
3120863 – JLG Lift – 1-1
SECTION 1. SPECIFICATIONS
1.1 CAPACITIES
Fuel Tank - 98 L.
Hydraulic Oil Tank - 208 L.
Hydraulic System (Including Tank) - Approx. 250 L
Torque Hub, Drive - 1.3 L.
Torque Hub, Swing - 0.5 L.
NOTE: Torque Hubs should be one-half full of lubricant.
(EPGL-90)
Engine Crankcase (Ford LSG & LRG 423) w/Filter - 4.7 L.
Engine Crankcase (Deutz F4L912) w/Filter - 9 L.
Tolerance on all engine rpm settings is plus or minus 10%.
1.2 COMPONENT DATA
Engine - Deutz F4L912
Oil Capacity - 9 L w/Filter, 8 L w/o Filter.
Low RPM 1800.
High RPM 2400.
Alternator - 60 Amp, belt drive.
Battery - 85 Amphour, 550 CCA, 12 VDC.
Horsepower - 70 @ 2400 RPM, no load
Tires
Foam-Filled Tires - 15 x 19.5
Drive Motor Displacement Machines Built
Prior to Jan. 1992
Cessna - 82.6 cc/rev.
Vickers - 41cc/rev.
2 Speed Cessna - 40.6 cc/rev.
Gear Reducer - Vickers Drive Motors only - 3.6:1.
Drive Motor Displacement Machines Built
from Jan. 1992 to Present
Rexroth - 46 cc/rev.
Drive Hub Ratios
2WD/2WS with fixed or oscillating front axle - 24:1.
2WD/4WS with oscillating front axle - 24:1.
4WD - 24:1.
2WD/4WS with fixed front axle/Vickers proportional
valves - 73:1.
4WD with Vickers Proportional valves - 30.04:1.
Steer System
Toe-in, adjust for 6.35 mm overall.
Swing System
Swing Motor - Displacement - 74 cc/Rev.
Swing Hub - Ratio - 69.50:1.
Swing Brake - Automatic spring applied, hydrau-
lically released disc brakes.