Binatone SYMPHONY 2210 - Manual (Page 47)

Handset registration
Color profile: Generic CMYK printer profile
Composite Default screen
To register to Your Symphony 2210 handset can be registered to any
a different brand
of base unit compatible handsets to your S ymphony 2210 base unit.
But we do not guaratee that all features or display
message will be available using other manufacturer’s
equipment.
1 Follow the instructions in the base unit’s User Guide to
put the base unit into registration mode (for example,
steps7 on page 42) .
2 Follow the instructions in the handset’s User Guide to
register the handset (for example, steps 1 to 5 on page 42).
If you need to enter a PIN for the base unit, refer to
base unit’s User Guide
http://www.binatone .com/ 43
To de-register
a handset Be careful about using this function — if you
de-register a handset by mistake, you’ll need to
re-register it to the base unit.
1
2
3
4
Press the then the or button
to go to
Press the PHONE/OK then
Key in the system PIN (default 0000) and
of registered
Key in a handset number to de-register
▲ ▼
the or button ▲ ▼
to confirm
The display shows Ú
The display shows a list Ú
confirm using PHONE/OK button
handset numbers .
The handset is de-registered Ú
DELH/S
PIN
after ' 'beep'
!
the
GAP-compatible base unit; or you can register other GAP-
BASE
MENU
online