Binatone SYMPHONY 2210 - Manual (Page 46)

Handset registration
The handsets supplied with your Symphony 2210
system are already registered to the base unit. You
don’t need to register them yourself.
If you buy new handsets separately, you’ll need to
register them. Up to FIVE handsets can be registered to
each base unit; but each handset is registered to one
To register a
new handset (Or to re-register an existing handset that has
accidentally become de-registered).
Make sure the handset you’re registering is in
standby mode.
1 Press and hold the HANDSET LOCATOR
button on the base unit until you hear
Registration tone (slow ‘beeps’)
2 On the handset, press the
then the
▲ or ▼ button to display REGISTER
3 Press the PHONE/OK button
Ú The display shows
Key in the system PIN (default 0000) and
press the PHONE/OK button
Ú
Color profile: Generic CMYK printer profile
Composite Default screen
4
The display shows for a few
while you hear two 'beeps' from the base unit.
name and number, you can change the name
as described on page 11.
The display should show the handset's Ú
PIN
Binatone Help Line: 0845 345 9677 (Local Call rate) 42
base unit only.
▲
▼
MENU button,
BASE
WAIT moment,
base unit The handset is registered to the