JLG 266 LoPro Operator Manual - Manual (Page 93)

Section 5 - Attachments and Hitches
5-21 3126023
Installation Procedure:
• Refer to “Attachment Installation” on page 5-7.
• Ensure length and cross section of the parent fork arm is equal to or exceeds the
parent fork arm blade length stamped into the fork extension.
• Secure the fork extensions to the forks by sliding the fork extension onto the
parent fork and install the retaining pin behind the vertical shank of the fork.
Equipment Damage Precautions
• Inspect the fork extension at the beginning of each work shift for wear or
damage.
• The heavy part of the load must be against the carriage backrest.
• Do not place the center of gravity of the load in front of the tip of the supporting
fork.
• Do not pick up a load or pry materials with the tip of a fork extension.