Park brake, Parking procedure, Park brake -7 parking procedure -7 – JLG 266 LoPro Operator Manual User Manual
Page 41: Warning
Section 3 - Controls And Indicators
3-7
3126023
Park Brake
The Park Brake Lever (4) controls the application and release of the park brake.
• Pull back to activate.
• Push forward to deactivate.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow “Shut-Down Procedure” on page 4-3.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake lever to "ON"
position, lower boom to ground and stop engine before leaving cab.
WARNING
CRUSH HAZARD. Turning engine off applies the park brake. Applying park
brake or turning engine off while traveling will cause unit to stop abruptly and
could cause load loss. Either may be used in an emergency situation.
OAH0170
4
This manual is related to the following products: