JLG E300 Service Manual - Manual (Page 43)

SECTION 3 - CHASSIS & TURNTABLE
3120772 – JLG Lift – 3-9
5. Remove 4 Thrust Washers (4B), 28 Needle Rollers
(4C) and the Thrust Spacer (4D) from the Second
Stage Planet Gear (4F). 6. Repeat Steps 1 though 5 for the remaining two
Planet Gears (4F).
7. Remove the Thrust Washer (4H) from the counter-
bore in the Output Carrier (4A).
Figure 3-5. Planet Gear
1F Output Carrier
4B Thrust Washer
4C Needle Bearing
4D Thrust Spacer
4F Planet Gear