JLG 680S Operator Manual - Manual (Page 89)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121678 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121679
Illustrated Parts Manual ...............................................................3121680
6.2 OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
Maximum Work Load (Capacity)
Unrestricted:
Restricted
500 lb (227 kg)
Refer to Capacity Decals on machine for
restricted platform capacities
Maximum Travel Grade (Gradeability)*
2WD
4WD
30%
45%
Maximum Travel Grade (Side Slope)* 5°
Maximum Vertical Platform Height: 68 ft. (20.7 m)
Maximum Horizontal Platform Reach 59 ft. (17.9 m)
Turning Radius (outside) 22 ft. 6 in. (6.8 m)
Turning Radius (inside) 12 ft. (3.6 m)
Maximum Drive Speed: 3.5 mph (1.5 m/s)
Max. Hydraulic System Pressure 4500 psi (310 Bar)
Maximum Wind Speed 28 mph (12.5 m/s)
Maximum Manual Force 400 N
Electrical System Voltage 12 Volts