JLG 601S Operator Manual User Manual

Page 27

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION

3121218

– JLG Lift –

2-7

4. Swing turntable to LEFT and RIGHT a minimum of 45

degrees. Check for smooth motion.

NOTE:

Step 5 is only applicable for machines with an external tilt
sensor.

5. With the aid of an assistant to monitor the CHASSIS

OUT OF LEVEL indicator light on the platform control
console, manually activate the indicator light by com-
pressing any one of the three tilt indicator mounting
springs. If the light does not illuminate, shut down
machine and contact a qualified service technician
before continuing operation.

NOTE:

Step 6 is applicable for machines with an internal tilt sen-
sor.

6. Check the chassis out of level indicator located on the

platform control console by driving, with the machine in
level position, up a suitable ramp of at least 5° slope.
Check the out of level indicator, with the machine on the
ramp. If the light does not illuminate, return the machine
to a level surface, shut down the machine, and contact a
qualified technician before resuming operation.