JLG 260MRT Operator Manual - Manual (Page 68)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-2 – JLG Lift – 3121219
6.2 OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
Maximum Occupants 2
Maximum Workload (Capacity)
Extension Only: 1,250 lb (570 kg)
300 lb (140 kg)
Maximum Gradeability 35%
Maximum Side Slope (Plat. stowed) 5°
Maximum Platform Height 26 ft (8m)
Maximum Tire Load 2,600lb
(1,180 kg)
Max. Ground Bearing Pressure 33 psi
(2.3 kg/cm 2 )
Maximum Allowable Wind Speed 28 mph
(12.5m/s)
Maximum Horizontal Manual Side Force:
CE/AUS 187 lb force (832 N)
90 lb force (400 N)
Turning Radius:
Inside
Outside
7.1ft (2.1 m)
14.5 ft (4.4 m)
Wheelbase 6.6 ft
(2 m)
Gross Machine Weight (Approximate) 7,330 lb
(3,325 kg)
Maximum Drive Speed 3.5 mph
(5.6 kmh)
Drive Speed (slow) - sec./25ft (7.6 m) 7-11
Drive Speed (fast) - sec./25ft (7.6 m) 4.8-5.8
Elevated Drive Speed - sec./25ft (7.6 m) 34.5 - 37
Elevation Switch Height (drive speed slow) 90-96 in.
(2.3 - 2.4 m)
Platform Lift Up Speed (platform empty) 25-29 seconds
Platform Lowering Speed (platform empty) 21-27 seconds
Max Operating Hydraulic Pressure 3,300 psi
(234 bar)
Electrical System Voltage 12 volt
Ground Clearance 8 in
(20.3 cm)
Table 6-1. Operating Specifications