JLG 800A_AJ Operator Manual - Manual (Page 30)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-10 – JLG Lift – 3121209
30. Engine Air Filter - No loose or missing parts; no visi-
ble damage; element clean.
31. Battery - Proper electrolyte levels; cables tight, no visi-
ble damage or corrosion.
32. Engine Oil Supply - Full mark on dipstick; filler cap
secure.
33. Muffler and Exhaust System - See Inspection Note.
34. Hydraulic Pumps - See Inspection Note.
35. Engine Tray Pivot - See Inspection Note.
36. Hydraulic Swivel - See Inspection Note.
37. LP Gas Tank - Brackets, hose and fittings secure; no
visible damage, no missing parts. (If Equipped)
38. Flow Valves - See Inspection Note.
39. Tower Boom - No visible damage; wear pads secure.
All cylinders - rod end pins and barrel-end pins prop-
erly secured.
40. Frame - See Inspection Note.
41. Main Boom Sections - No visible damage; wear pads
secure. All cylinders - rod end shafts and barrel-end
shafts properly secured.
42. Platform Pivot Pin - See Inspection Note.
43. Upright - In vertical position, relative to the chassis.
Refer to Figure 2-9. and Figure 2-10. If out of align-
ment, do not use machine until the upright has been
synchronized in accordance with Section 4.16.
Figure 2-6. Daily Walk-Around Inspection (Sheet 4 of 4)