Daily walk-around inspection (sheet 3 of 4) -9 – JLG 800A_AJ Operator Manual User Manual
Page 29

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121209
– JLG Lift –
2-9
13. Control Valve (Tank Compartment) - No loose or miss-
ing lug nuts, proper inflation (pneumatic). Inspect for worn
tread, cuts, tears or other discrepancies. Inspect wheels
for damage and corrosion.
14. Turntable Bearing and Pinion - No loose or missing
hardware; no visible damage, evidence of proper lubri-
cation.
15. Hydraulic Oil Medium Pressure Filter Housing - See
Inspection Note.
16. Hydraulic Oil Return Filter Housing - See Inspection
Note.
17. Manual Descent - See Inspection Note. (if equipped)
18. LP Gas Tank - Brackets, hose and fittings secure; no
visible damage, no missing parts. (If Equipped)
19. Hydraulic Oil Supply - Recommended oil level sight
gauge. (Check level with cold oil, systems shut down,
machine with booms retracted and lowered) Cap in
place and secure.
20. Hydraulic Oil Breather - Element in place, not
clogged, no sign of overflow.
21. Ground Controls - Switches operable, no visible dam-
age, decals secure and legible.
22. Fuel Supply - Fuel filler cap secure. Tank - no visible
damage; no evidence of leaks.
23. Swing Drive Motor and Brake - See Inspection Note.
24. Door and Latches - Hood door and latches in working
condition, properly secured, no loose or missing parts.
25. Oscillating Cam Valve - No visible damage, no evi-
dence of leakage, no unsupported hoses. (If
Equipped)
26. Tie Rod and Steering Linkage - See Inspection Note.
27. Oscillating Axle Cylinder - See Inspection Note. (If
Equipped)
28. Dual Capacity and Horizontal Cutout Limit Switches
if equipped - Properly secured, no damage to the
switches, arm free to move, and free from dirt and
grease.
29. Oscillating Axle - See Inspection Note. (If Equipped)
Figure 2-5. Daily Walk-Around Inspection (Sheet 3 of 4)