JLG 150HAX Operator Manual - Manual (Page 28)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-8 – JLG Lift – 3121213
9. Drive Hub, Drive Motor and Drive Brake - See
Inspection Note.
10. Steer/Drive Wheel/Tire Assembly - Properly
secured; no loose or missing lug nuts; no visible dam-
age.
11. Hose and Cable Guards/Clamps - See Inspection
Note.
12. Power Track - See Inspection Note.
13. Muffler and Exhaust System - See Inspection Note.
14. Engine Air Filter Assembly - See Inspection Note;
element clean.
15. Engine Oil Supply - Full mark on dipstick; filler cap
secure.
16. Cowling and Latches - All cowling, doors, and
latches in working condition; See Inspection Note.
17. Control Valve Compartment - See Inspection Note.
18. Ground Controls - Switches and controllers opera-
ble; no visible damage; placards secure and legible.
19. Axle Jack/Extension Switches - See Inspection
Note; decals in place and legible.
20. Main Boom Pivot Pin - See Inspection Note.
21. Manual Descent Valves and Pump - Valve handles
and pump handle properly secured. Instruction plac-
ards in place and legible.
22. Turntable Lock - Operable; See Inspection Note.
23. Battery - Proper electrolyte level; cables tight; no visi-
ble damage or corrosion.
24. Turntable Bearing and Pinion - See Inspection Note.
No evidence of loose bolts or looseness between
bearing and structure.
Figure 2-3. Daily Walk-Around Inspection - Sheet 3 of 4