JLG 600A_AJ Operator Manual - Manual (Page 35)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121204 – JLG Lift – 2-13
Figure 2-5. Daily Walk-Around Inspection Points - Sheet 2 of 3
12. Wheel/Tire Assembly - No loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepan-
cies. Inspect wheels for damage and corrosion.
13. Tie Rod and Steering Linkage (4 Wheel Steer) - Tie
rod end studs locked.
14. Turntable Lock - Operable.
15. Auxiliary Power Pump - See Note.
16. Control Valve (Tank Compartment) - See Note.
17. Turntable Bearing and Pinion - No evidence of loose
bolts or looseness between bearing and structure.
18. Hydraulic Oil Medium Pressure Filter Housing - Hous-
ing secure.
19. Hydraulic Oil Return Filter Housing - Housing secure.
20. Manual Descent - See Note.
21. LP Gas Tank (If Equipped) - See Note.
22. Hydraulic Oil Supply - Recommended oil level sight
gauge. (Check level with cold oil, systems shut down,
machine in stowed position) Cap in place and secure.
23. Hydraulic Oil Breather - Element in place, not
clogged, no sign of overflow.
24. Ground Controls - Switches operable, decals secure
and legible.
25. Fuel Supply - Fuel filler cap secure. Tank - See Note.
26. Swing Drive Motor and Brake - See Note.
27. Door and Latches - Hood door and latches in working
condition.
28. Oscillating Cam Valve (If Equipped) - See Note.