JLG 1100SJP Operator Manual - Manual (Page 103)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121255 – JLG Lift – 6-3
Chassis
Table 6-4. Chassis Specifications
Maximum Travel Grade With boom in stowed
position (Gradeability) (1100SJP) 45%
Maximum Travel Grade With boom in stowed
position (Gradeability) (1100S) 30%
Maximum Travel Grade With boom in stowed
position (Side Slope) 5°
Turning Radius - 1100SJP (Axles Retracted)
Outside
Inside
22 ft. 6 in. (6.8 m)
14 ft. 5 in. (4.4 m)
Turning Radius - 1100SJP (Axles Extended)
Inside
Outside
8 ft. (2.4 m)
19 ft. 4 in. (5.9 m)
Turning Radius - 1100S (Axles Retracted)
Outside
Inside
35 ft. 6 in. (10.8 m)
25 ft. 3 in. (7.7 m)
Turning Radius - 1100S (Axles Extended)
Inside
Outside
10 ft. 11 in. (3.33 m)
27 ft. (8.2 m)
Max Tire Load 25,000 lbs. (11,340 kg)
Max Ground Bearing Pressure (1100SJP) 100 psi (7.03 kg/cm 2 )
Max Ground Bearing Pressure (1100S) 112 psi (7.87 kg/cm 2 )
Maximum Drive Speed 3.25 mph (5.2 kph)
Max. Hydraulic System Pressure 4600 psi (317 Bar)
Maximum Wind Speed 28 mph (12.5 m/s)
Maximum Manual Force 400 N
Electrical System Voltage 12 Volts
Gross Machine Weight (1100SJP) 40,900 lb. (18,552 kg)
Gross Machine Weight (1100S) 39,800 lb. (18,053 kg)
Table 6-4. Chassis Specifications